View SN55451B08_3502024.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 1 post office box 655303 ? dallas, texas 75265 peripheral drivers for high-current switching at very high speeds characterized for use to 300 ma high-voltage outputs no output latch-up at 20 v (after conducting 300 ma) high-speed switching circuit flexibility for varied applications ttl-compatible diode-clamped inputs standard supply voltages plastic dip (p) with copper lead frame provides cooler operation and improved reliability package options include plastic small-outline packages, ceramic chip carriers, and standard plastic and ceramic 300-mil dips summary of devices device logic of complete circuit packages sn55451b and fk, jg sn55452b nand jg sn55453b or fk, jg sn55454b nor jg sn75451b and d, p sn75452b nand d, p sn75453b or d, p sn75454b nor d, p description the sn55451b through sn55454b and sn75451b through sn75454b are dual peripheral drivers designed for use in systems that employ ttl logic. this family is functionally interchangeable with and replaces the sn75450 family and the sn75450a family devices manufactured previously. the speed of the devices is equal to that of the sn75450 family, and the parts are designed to ensure freedom from latch-up. diode-clamped inputs simplify circuit design. typical applications include high-speed logic buffers, power drivers, relay drivers, lamp drivers, mos drivers, line drivers, and memory drivers. the sn55451b/sn75451b, sn55452b/sn75452b, sn55453b/sn75453b, and sn55454b/sn75454b are dual peripheral and, nand, or, and nor drivers, respectively (assuming positive logic), with the output of the logic gates internally connected to the bases of the npn output transistors. the sn55' drivers are characterized for operation over the full military range of 55 c to 125 c. the sn75' drivers are characterized for operation from 0 c to 70 c. copyright ? 1999, texas instruments incorporated production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. 1 2 3 4 8 7 6 5 1a 1b 1y gnd v cc 2b 2a 2y sn55451b, sn55452b, sn55453b, sn55454b . . . jg package sn75451b, sn75452b, sn75453b, sn75454b ...d or p p ackage (top view) 3 2 1 20 19 910111213 4 5 6 7 8 18 17 16 15 14 nc 2b nc 2a nc nc 1b nc 1y nc sn55451b, sn55452b sn55453b, sn55454b . . . fk package (top view) nc 1a nc nc nc nc gnd nc nc no internal connection cc v 2y
sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 2 post office box 655303 ? dallas, texas 75265 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) sn55' sn75' unit supply voltage, v cc (see note 1) 7 7 v input voltage, v i 5.5 5.5 v inter-emitter voltage (see note 2) 5.5 5.5 v off-state output voltage, v o 30 30 v continuous collector or output current, i ok (see note 3) 400 400 ma peak collector or output current, i i (t w 10 ms, duty cycle 50%, see note 4) 500 500 ma continuous total power dissipation see dissipation rating table operating free-air temperature range, t a 55 to 125 0 to 70 c storage temperature range, t stg 65 to 150 65 to 150 c case temperature for 60 seconds fk package 260 c lead temperature 1,6 mm (1/16 inch) from case for 60 seconds jg package 300 c lead temperature 1,6 mm (1/16 inch) from case for 10 seconds d or p package 260 c notes: 1. voltage values are with respect to network gnd, unless otherwise specified. 2. this is the voltage between two emitters of a multiple-emitter transistor. 3. this value applies when the base-emitter resistance (r be ) is equal to or less than 500 w . 4. both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within the continuous dissipation rating. dissipation rating table package t a 25 c derating factor t a = 70 c t a = 125 c package a power rating above t a = 25 c a power rating a power rating d 725 mw 5.8 mw/ c 464 mw e fk 1375 mw 11.0 mw/ c 880 mw 275 mw jg 1050 mw 8.4 mw/ c 672 mw 210 mw p 1000 mw 8.0 mw/ c 640 mw e recommended operating conditions sn55' sn75' unit min nom max min nom max unit supply voltage, v cc 4.5 5 5.5 4.75 5 5.25 v high-level input voltage, v ih 2 2 v low-level input voltage, v il 0.8 0.8 v operating free-air temperature, t a 55 125 0 70 c
sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 3 post office box 655303 ? dallas, texas 75265 logic symbol 2 & 5 3 2b 2a 1b 1a 2y 1y 7 6 2 1 2 this symbol is in accordance with ansi/ieee std 91-1984 and iec publication 617-12. pin numbers shown are for the d, jg, and p packages. logic diagram (positive logic) 2b 2a 1b 1a 4 5 3 gnd 2y 1y 7 6 2 1 function table (each driver) a b y l l l (on state) l h l (on state) h l l (on state) h h h (off state) positive logic: y = ab or a +b electrical characteristics over recommended operating free-air temperature range parameter test conditions 3 sn55451b sn75451b unit parameter test conditions 3 min typ max min typ max unit v ik input clamp voltage v cc = min, i i = 12 ma 1.2 1.5 1.2 1.5 v v cc = min, v il = 0.8 v, 025 05 025 04 v ol low level out p ut voltage cc i ol = 100 ma il 0 . 25 0 . 5 0 . 25 0 . 4 v v ol lo w- le v el o u tp u t v oltage v cc = min, v il = 0.8 v, 05 08 05 07 v cc i ol = 300 ma il 0 . 5 0 . 8 0 . 5 0 . 7 i oh high level out p ut current v cc = min, v ih = min, 300 100 m a i oh high - le v el o u tp u t c u rrent cc v oh = 30 v ih 300 100 m a i i input current at maximum input voltage v cc = max, v i = 5.5 v 1 1 ma i ih high-level input current v cc = max, v i = 2.4 v 40 40 m a i il low-level input current v cc = max, v i = 0.4 v 1 1.6 1 1.6 ma i cch supply current, outputs high v cc = max, v i = 5 v 7 11 7 11 ma i ccl supply current, outputs low v cc = max, v i = 0 52 65 52 65 ma 3 for conditions shown as min or max, use the appropriate value specified under recommended operating conditions. all typical values are at v cc = 5 v, t a = 25 c. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions min typ max unit t plh propagation delay time, low-to-high-level output 18 25 t phl propagation delay time, high-to-low-level output i o 200 ma, c l = 15 pf, 18 25 ns t tlh transition time, low-to-high-level output o r l = 50 w , l see figure 1 5 8 ns t thl transition time, high-to-low-level output 7 12 v oh high level out p ut voltage after switching sn55451b v s = 20 v, i o 300 ma, v s 6.5 mv v oh high - le v el o u tp u t v oltage after s w itching sn75451b s , see figure 2 o , v s 6.5 mv v cc a gnd y 500 w 1 k w b 4 k w 1.6 k w 130 w resistor values shown are nominal. schematic (each driver)
sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 4 post office box 655303 ? dallas, texas 75265 logic symbol 2 & 5 3 2b 2a 1b 1a 2y 1y 7 6 2 1 2 this symbol is in accordance with ansi/ieee std 91-1984 and iec publication 617-12. pin numbers shown are for the d, jg, and p packages. logic diagram (positive logic) 2b 2a 1b 1a 4 5 3 gnd 2y 1y 7 6 2 1 function table (each driver) a b y l l h (off state) l h h (off state) h l h (off state) h h l (on state) positive logic: y = ab or a +b electrical characteristics over recommended operating free-air temperature range parameter test conditions 3 sn55452b sn75452b unit parameter test conditions 3 min typ max min typ max unit v ik input clamp voltage v cc = min, i i = 12 ma 1.2 1.5 1.2 1.5 v v cc = min, v ih = min, 025 05 025 04 v ol low level out p ut voltage cc , i ol = 100 ma ih , 0 . 25 0 . 5 0 . 25 0 . 4 v v ol lo w- le v el o u tp u t v oltage v cc = min, v ih = min, 05 08 05 07 v cc , i ol = 300 ma ih , 0 . 5 0 . 8 0 . 5 0 . 7 i oh high level out p ut current v cc = min, v il = 0.8 v, 300 100 m a i oh high - le v el o u tp u t c u rrent cc , v oh = 30 v il , 300 100 m a i i input current at maximum input voltage v cc = max, v i = 5.5 v 1 1 ma i ih high-level input current v cc = max, v i = 2.4 v 40 40 m a i il low-level input current v cc = max, v i = 0.4 v 1.1 1.6 1.1 1.6 ma i cch supply current, outputs high v cc = max, v i = 0 11 14 11 14 ma i ccl supply current, outputs low v cc = max, v i = 5 v 56 71 56 71 ma 3 for conditions shown as min or max, use the appropriate value specified under recommended operating conditions. all typical values are at v cc = 5 v, t a = 25 c. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions min typ max unit t plh propagation delay time, low-to-high-level output 26 35 t phl propagation delay time, high-to-low-level output i o 200 ma, c l = 15 pf, 24 35 ns t tlh transition time, low-to-high-level output o r l = 50 w , l see figure 1 5 8 ns t thl transition time, high-to-low-level output 7 12 v oh high level out p ut voltage after switching sn55452b v s = 20 v, i o 300 ma, v s 6.5 mv v oh high - le v el o u tp u t v oltage after s w itching sn75452b s , see figure 2 o , v s 6.5 mv v cc a gnd y 500 w 1 k w b 4 k w 1.6 k w 130 w schematic (each driver) resistor values shown are nominal. 1 k w 1.6 k w
sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 5 post office box 655303 ? dallas, texas 75265 logic symbol 2 1 5 3 2b 2a 1b 1a 2y 1y 7 6 2 1 2 this symbol is in accordance with ansi/ieee std 91-1984 and iec publication 617-12. pin numbers shown are for the d, jg, and p packages. logic diagram (positive logic) 2b 2a 1b 1a 4 5 3 gnd 2y 1y 7 6 2 1 function table (each driver) a b y l l l (on state) l h h (off state) h l h (off state) h h h (off state) positive logic: y = a+b or a b electrical characteristics over recommended operating free-air temperature range parameter test conditions 3 sn55453b sn75453b unit parameter test conditions 3 min typ max min typ max unit v ik input clamp voltage v cc = min, i i = 12 ma 1.2 1.5 1.2 1.5 v v cc = min, v il = 0.8 v, 025 05 025 04 v ol low level out p ut voltage cc , i ol = 100 ma il 0 . 25 0 . 5 0 . 25 0 . 4 v v ol lo w- le v el o u tp u t v oltage v cc = min, v il = 0.8 v, 05 08 05 07 v cc , i ol = 300 ma il 0 . 5 0 . 8 0 . 5 0 . 7 i oh high level out p ut current v cc = min, v ih = min, 300 100 m a i oh high - le v el o u tp u t c u rrent cc , v oh = 30 v ih , 300 100 m a i i input current at maximum input voltage v cc = max, v i = 5.5 v 1 1 ma i ih high-level input current v cc = max, v i = 2.4 v 40 40 m a i il low-level input current v cc = max, v i = 0.4 v 1 1.6 1 1.6 ma i cch supply current, outputs high v cc = max, v i = 5 v 8 11 8 11 ma i ccl supply current, outputs low v cc = max, v i = 0 54 68 54 68 ma 3 for conditions shown as min or max, use the appropriate value specified under recommended operating conditions. all typical values are at v cc = 5 v, t a = 25 c. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions min typ max unit t plh propagation delay time, low-to-high-level output 18 25 t phl propagation delay time, high-to-low-level output i o 200 ma, c l = 15 pf, 18 25 ns t tlh transition time, low-to-high-level output o , r l = 50 w , l , see figure 1 5 8 ns t thl transition time, high-to-low-level output 7 12 v oh high level out p ut voltage after switching sn55453b v s = 20 v, i o 300 ma, v s 6.5 mv v oh high - le v el o u tp u t v oltage after s w itching sn75453b s see figure 2 o v s 6.5 mv schematic (each driver) resistor values shown are nominal. v cc a gnd y 500 w 1 k w b 4 k w 1.6 k w 130 w 4 k w
sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 6 post office box 655303 ? dallas, texas 75265 logic symbol 2 5 3 2b 2a 1b 1a 2y 1y 7 6 2 1 2 this symbol is in accordance with ansi/ieee std 91-1984 and iec publication 617-12. pin numbers shown are for the d, jg, and p packages. 1 logic diagram (positive logic) 2b 2a 1b 1a 4 5 3 gnd 2y 1y 7 6 2 1 function table (each driver) a b y l l h (off state) l h l (on state) h l l (on state) h h l (on state) positive logic: y = a+b or ab electrical characteristics over recommended operating free-air temperature range parameter test conditions 3 sn55454b sn75454b unit parameter test conditions 3 min typ max min typ max unit v ik input clamp voltage v cc = min, i i = 12 ma 1.2 1.5 1.2 1.5 v v cc = min, v ih = min, 025 05 025 04 v ol low level out p ut voltage cc , i ol = 100 ma ih , 0 . 25 0 . 5 0 . 25 0 . 4 v v ol lo w- le v el o u tp u t v oltage v cc = min, v ih = min, 05 08 05 07 v cc , i ol = 300 ma ih , 0 . 5 0 . 8 0 . 5 0 . 7 i oh high level out p ut current v cc = min, v il = 0.8 v, 300 100 m a i oh high - le v el o u tp u t c u rrent cc , v oh = 30 v il , 300 100 m a i i input current at maximum input voltage v cc = max, v i = 5.5 v 1 1 ma i ih high-level input current v cc = max, v i = 2.4 v 40 40 m a i il low-level input current v cc = max, v i = 0.4 v 1 1.6 1 1.6 ma i cch supply current, outputs high v cc = max, v i = 0 13 17 13 17 ma i ccl supply current, outputs low v cc = max, v i = 5 v 61 79 61 79 ma 3 for conditions shown as min or max, use the appropriate value specified under recommended operating conditions. all typical values are at v cc = 5 v, t a = 25 c. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions min typ max unit t plh propagation delay time, low-to-high-level output 27 35 t phl propagation delay time, high-to-low-level output i o 200 ma, c l = 15 pf, 24 35 ns t tlh transition time, low-to-high-level output o , r l = 50 w , l , see figure 1 5 8 ns t thl transition time, high-to-low-level output 7 12 v oh high level out p ut voltage after switching sn55454b v s = 20 v, i o 300 ma, v s 6.5 mv v oh high - le v el o u tp u t v oltage after s w itching sn75454b s see figure 2 o v s 6.5 mv 4 k w 1.6 k w 2 k w schematic (each driver) resistor values shown are nominal. v cc a gnd y 500 w 1 k w b 4 k w 2 k w 130 w 1 k w
sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 7 post office box 655303 ? dallas, texas 75265 parameter measurement information gnd pulse generator (see note a) 2.4 v input sub circuit under test 10% 10% 90% 90% 1.5 v 1.5 v 5 ns 90% 90% 10% 10% 1.5 v 1.5 v 0.5 m s 10% 10% 90% 90% 50% 50% t phl t plh t thl 3 v 0 v 3 v 0 v v oh v o l output input test circuit voltage waveforms '451b '452b '453b '454b 0.4 v c l = 15 pf (see note b) output 10 v r l = 50 w 10 ns 5 ns 10 ns t tlh '451b '453b input '452b '454b notes: a. the pulse generator has the following characteristics: prr 1 mhz, z o = 50 w . b. c l includes probe and jig capacitance. figure 1. test circuit and voltage waveforms, complete drivers gnd 2.4 v input sub 90% 90% 1.5 v 1.5 v 5 ns 90% 90% 10% 10% 1.5 v 1.5 v 40 m s 10% 10% 3 v 0 v 3 v 0 v v oh output input test circuit voltage waveforms '451b '452b '453b '454b 0.4 v output v s = 20 v 10 ns 5 ns 10 ns '451b '453b input '452b '454b 65 w 2 mh 1n3064 5 v v o l pulse generator (see note a) circuit under test c l = 15 pf (see note b) notes: a. the pulse generator has the following characteristics: prr 12.5 khz, z o = 50 w . b. c l includes probe and jig capacitance. figure 2. test circuit and voltage waveforms for latch-up test of complete drivers
sn55451b, sn55452b, sn55453b, sn55454b sn75451b, sn75452b, sn75453b, sn75454b dual peripheral drivers slrs021b december 1976 revised september 1999 8 post office box 655303 ? dallas, texas 75265 typical characteristics i c collector current ma transistor collector-emitter saturation voltage vs collector current vce(sat) collector-emitter saturation voltage v 10 0.6 400 0 0.1 0.2 0.3 0.4 0.5 20 40 70 100 200 i c i b ce(sat) v = 10 t a = 25 c t a = 0 c t a = 70 c see note a figure 3 note a: these parameters must be measured using pulse techniques, t w = 300 m s, duty cycle 2%.
important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ti?s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ti?s standard warranty. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ti assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ti components. to minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any ti patent right, copyright, mask work right, or other ti intellectual property right relating to any combination, machine, or process in which ti products or services are used. information published by ti regarding third-party products or services does not constitute a license from ti to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ti is not responsible or liable for such altered documentation. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. ti products are not authorized for use in safety-critical applications (such as life support) where a failure of the ti product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of ti products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by ti. further, buyers must fully indemnify ti and its representatives against any damages arising out of the use of ti products in such safety-critical applications. ti products are neither designed nor intended for use in military/aerospace applications or environments unless the ti products are specifically designated by ti as military-grade or "enhanced plastic." only products designated by ti as military-grade meet military specifications. buyers acknowledge and agree that any such use of ti products which ti has not designated as military-grade is solely at the buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti products are neither designed nor intended for use in automotive applications or environments unless the specific ti products are designated by ti as compliant with iso/ts 16949 requirements. buyers acknowledge and agree that, if they use any non-designated products in automotive applications, ti will not be responsible for any failure to meet such requirements. following are urls where you can obtain information on other texas instruments products and application solutions: products applications amplifiers amplifier.ti.com audio www.ti.com/audio data converters dataconverter.ti.com automotive www.ti.com/automotive dsp dsp.ti.com broadband www.ti.com/broadband interface interface.ti.com digital control www.ti.com/digitalcontrol logic logic.ti.com military www.ti.com/military power mgmt power.ti.com optical networking www.ti.com/opticalnetwork microcontrollers microcontroller.ti.com security www.ti.com/security low power www.ti.com/lpw telephony www.ti.com/telephony wireless video & imaging www.ti.com/video wireless www.ti.com/wireless mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2007, texas instruments incorporated
packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) 5962-9563301q2a active lccc fk 20 1 tbd post-plate n / a for pkg type 5962-9563301qpa active cdip jg 8 1 tbd a42 snpb n / a for pkg type 77049012a active lccc fk 20 1 tbd post-plate n / a for pkg type 7704901pa active cdip jg 8 1 tbd a42 snpb n / a for pkg type 77049022a active lccc fk 20 1 tbd post-plate n / a for pkg type 7704902pa active cdip jg 8 1 tbd a42 snpb n / a for pkg type jm38510/12902bpa active cdip jg 8 1 tbd a42 snpb n / a for pkg type jm38510/12903bpa active cdip jg 8 1 tbd a42 snpb n / a for pkg type jm38510/12905bpa active cdip jg 8 1 tbd a42 snpb n / a for pkg type sn55451bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type sn55452bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type sn55453bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type sn55454bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type sn75451bd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bde4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bdre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bp active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75451bpe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75451bpsr active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bpsre4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75451bpsrg4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bde4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bdre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim package option addendum www.ti.com 5-mar-2008 addendum-page 1
orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) sn75452bp active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75452bpe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75452bpsr active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bpsre4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75452bpsrg4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bde4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bdre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bp active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75453bpe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75453bpsr active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bpsre4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75453bpsrg4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bde4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bdre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bp active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75454bpe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type sn75454bpsr active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim sn75454bpsre4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim package option addendum www.ti.com 5-mar-2008 addendum-page 2
orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) sn75454bpsrg4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim snj55451bfk active lccc fk 20 1 tbd post-plate n / a for pkg type snj55451bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type snj55452bfk active lccc fk 20 1 tbd post-plate n / a for pkg type snj55452bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type snj55453bfk active lccc fk 20 1 tbd post-plate n / a for pkg type snj55453bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type snj55454bfk active lccc fk 20 1 tbd post-plate n / a for pkg type snj55454bjg active cdip jg 8 1 tbd a42 snpb n / a for pkg type (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. -- the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. package option addendum www.ti.com 5-mar-2008 addendum-page 3
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant sn75451bdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 sn75451bpsr so ps 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 q1 sn75452bdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 sn75452bpsr so ps 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 q1 sn75453bdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 sn75453bpsr so ps 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 q1 sn75454bdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 sn75454bpsr so ps 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 q1 package materials information www.ti.com 19-mar-2008 pack materials-page 1
*all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) sn75451bdr soic d 8 2500 340.5 338.1 20.6 sn75451bpsr so ps 8 2000 346.0 346.0 33.0 sn75452bdr soic d 8 2500 340.5 338.1 20.6 sn75452bpsr so ps 8 2000 346.0 346.0 33.0 sn75453bdr soic d 8 2500 340.5 338.1 20.6 sn75453bpsr so ps 8 2000 346.0 346.0 33.0 sn75454bdr soic d 8 2500 340.5 338.1 20.6 sn75454bpsr so ps 8 2000 346.0 346.0 33.0 package materials information www.ti.com 19-mar-2008 pack materials-page 2

mechanical data mlcc006b october 1996 post office box 655303 ? dallas, texas 75265 fk (s-cqcc-n**) leadless ceramic chip carrier 4040140 / d 10/96 28 terminal shown b 0.358 (9,09) max (11,63) 0.560 (14,22) 0.560 0.458 0.858 (21,8) 1.063 (27,0) (14,22) a no. of min max 0.358 0.660 0.761 0.458 0.342 (8,69) min (11,23) (16,26) 0.640 0.739 0.442 (9,09) (11,63) (16,76) 0.962 1.165 (23,83) 0.938 (28,99) 1.141 (24,43) (29,59) (19,32) (18,78) ** 20 28 52 44 68 84 0.020 (0,51) terminals 0.080 (2,03) 0.064 (1,63) (7,80) 0.307 (10,31) 0.406 (12,58) 0.495 (12,58) 0.495 (21,6) 0.850 (26,6) 1.047 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.035 (0,89) 0.010 (0,25) 12 13 14 15 16 18 17 11 10 8 9 7 5 4 3 2 0.020 (0,51) 0.010 (0,25) 6 1 28 26 27 19 21 b sq a sq 22 23 24 25 20 0.055 (1,40) 0.045 (1,14) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. this package can be hermetically sealed with a metal lid. d. the terminals are gold plated. e. falls within jedec ms-004

mechanical data mpdi001a january 1995 revised june 1999 post office box 655303 ? dallas, texas 75265 p (r-pdip-t8) plastic dual-in-line 8 4 0.015 (0,38) gage plane 0.325 (8,26) 0.300 (7,62) 0.010 (0,25) nom max 0.430 (10,92) 4040082/d 05/98 0.200 (5,08) max 0.125 (3,18) min 5 0.355 (9,02) 0.020 (0,51) min 0.070 (1,78) max 0.240 (6,10) 0.260 (6,60) 0.400 (10,60) 1 0.015 (0,38) 0.021 (0,53) seating plane m 0.010 (0,25) 0.100 (2,54) notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. falls within jedec ms-001 for the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
mechanical data mcer001a january 1995 revised january 1997 post office box 655303 ? dallas, texas 75265 jg (r-gdip-t8) ceramic dual-in-line 0.310 (7,87) 0.290 (7,37) 0.014 (0,36) 0.008 (0,20) seating plane 4040107/c 08/96 5 4 0.065 (1,65) 0.045 (1,14) 8 1 0.020 (0,51) min 0.400 (10,16) 0.355 (9,00) 0.015 (0,38) 0.023 (0,58) 0.063 (1,60) 0.015 (0,38) 0.200 (5,08) max 0.130 (3,30) min 0.245 (6,22) 0.280 (7,11) 0.100 (2,54) 0 15 notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. this package can be hermetically sealed with a ceramic lid using glass frit. d. index point is provided on cap for terminal identification. e. falls within mil std 1835 gdip1-t8
important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ti?s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ti?s standard warranty. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ti assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ti components. to minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any ti patent right, copyright, mask work right, or other ti intellectual property right relating to any combination, machine, or process in which ti products or services are used. information published by ti regarding third-party products or services does not constitute a license from ti to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of ti information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ti is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. ti products are not authorized for use in safety-critical applications (such as life support) where a failure of the ti product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of ti products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by ti. further, buyers must fully indemnify ti and its representatives against any damages arising out of the use of ti products in such safety-critical applications. ti products are neither designed nor intended for use in military/aerospace applications or environments unless the ti products are specifically designated by ti as military-grade or "enhanced plastic." only products designated by ti as military-grade meet military specifications. buyers acknowledge and agree that any such use of ti products which ti has not designated as military-grade is solely at the buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti products are neither designed nor intended for use in automotive applications or environments unless the specific ti products are designated by ti as compliant with iso/ts 16949 requirements. buyers acknowledge and agree that, if they use any non-designated products in automotive applications, ti will not be responsible for any failure to meet such requirements. following are urls where you can obtain information on other texas instruments products and application solutions: products applications amplifiers amplifier.ti.com audio www.ti.com/audio data converters dataconverter.ti.com automotive www.ti.com/automotive dsp dsp.ti.com broadband www.ti.com/broadband clocks and timers www.ti.com/clocks digital control www.ti.com/digitalcontrol interface interface.ti.com medical www.ti.com/medical logic logic.ti.com military www.ti.com/military power mgmt power.ti.com optical networking www.ti.com/opticalnetwork microcontrollers microcontroller.ti.com security www.ti.com/security rfid www.ti-rfid.com telephony www.ti.com/telephony rf/if and zigbee? solutions www.ti.com/lprf video & imaging www.ti.com/video wireless www.ti.com/wireless mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2008, texas instruments incorporated

▲Up To Search▲

Price & Availability of SN55451B08

	To Download SN55451B08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .